Installing Terminal Modules For The Interface Module And Electronics Modules - Siemens SIMATIC ET 200iSP Operating Instructions Manual

Installing

5.4 Installing Terminal Modules for the Interface Module and Electronics Modules

5.4 Installing Terminal Modules for the Interface Module and
Electronics Modules
Properties
• The terminal modules are used to accommodate the interface module and the electronic
modules
– TM-IM/EM: Terminal module for the interface module and electronic module, located
– TM-IM/IM: Terminal module for 2 interface modules (redundancy of the interface
– TM-EM/EM: Terminal module for the electronic modules, are located to the right of the
– TM-RM/RM: Terminal module for the digital output modules 2 DO Relay UC60V/2A, are
• The terminal modules can be prewired (without electronic modules).
Requirements
The mounting rail is installed.
Required tools
3.5 mm screwdriver.
4.5 mm screwdriver.
112
directly to the right of the terminal module TM-PS-A
modules), located to the right of the TM-PS-A or TM-PS-B.
TM-IM/EM or TM-IM/IM terminal module.
located to the right of the terminal module TM-IM/EM or TM-IM/IM.
Operating Instructions, 11/2022, A5E00247483-AK
ET 200iSP