Siemens SIMATIC ET 200iSP Operating Instructions Manual page 28

Product overview
2.1 ET 200iSP Distributed I/O Station
Component
Terminal module
Power supply PS
28
Function
... carries the wiring and holds the power supply, inter‐
face module and the electronic modules. Terminal mod‐
ules are available in the following variants:
• TM-PS-A (6ES7193-7DA10-0AA0) for the power sup‐
ply PS DC24V
• TM-PS-B (6ES7193-7DB10-0AA0) for the redundant
power supply PS DC24V
• TM-PS-A (6ES7193-7DA20-0AA0) for the power sup‐
ply PS AC120/230V and PS DC24V (as of product ver‐
sion 7)
• TM-PS-B (6ES7193-7DB20-0AA0) for the redundant
power supply PS AC120/230V and PS DC24V (as of
product version 7)
• TM-IM/EM for the interface module
• TM-IM/IM for the redundant interface module
• TM-EM/EM for the electronic modules
• TM-RM/RM for the electronic module 2 DO Relay
UC60V/2A
Both terminal modules and can be used for TM IM/EM and
TM IM/IM as well as for IM 152-1PN and IM 152-1DP.
The DP plug of the terminal module has no function
when PROFINET is being used and is covered by the IM
152-1PN.
... is plugged onto the terminal module TM‑PS-A or TM-
PS-B. The power supply module supplies the electronic
circuits and sensors with voltage.
• Power supply PS DC24V to TM-PS-A
(6ES7193-7DA10-0AA0), TM-PS-B
(6ES7193-7DB10-0AA0)
• Power supply PS AC120/230V and PS DC24V (as of
product version 7) to TM‑PS‑A
(6ES7193-7DA20-0AA0), TM-PS-B
(6ES7193-7DB20-0AA0)
Image
TM-PS-A
TM-IM/EM
TM-EM/EM
Operating Instructions, 11/2022, A5E00247483-AK
TM-PS-B
TM-IM/IM
TM-RM/RM
ET 200iSP