System planning
1.4 ET 200iSP station on PROFIBUS DP
• Distributed I/O stations
• Devices from other manufacturers
Setting up a network based on PROFIBUS DP
The following figure shows an example of the configuration with PROFIBUS DP.
• The DP master is integrated in the respective device, e.g. the S7-400 has a PROFIBUS DP
interface.
• The ET 200iSP distributed I/O devices are connected to the DP masters via PROFIBUS DP and
PROFIBUS RS 485‑IS.
Figure 1-2
Example for the configuration of a PROFIBUS DP network
22
Operating Instructions, 11/2022, A5E00247483-AK
ET 200iSP