Putting The Example Into Operation; Evaluating The Diagnostics - Siemens SIMATIC ET 200iSP Operating Instructions Manual

3.12

Putting the Example into Operation

Commissioning
1. Switch on the power supply of the ET 200iSP.
2. Observe the status LED at the S7-400 and at the ET 200iSP:
LEDs of the CPU:
– RUN: on (means: LED lights up)
– All other LEDs: off (means: LED does not light up)
For PROFINET configuration - LEDs on the interface module IM 152-1PN of the ET 200iSP:
– ER: Off
– MT: Off
– ACT: Off
– RN: on
– PS1: On, PS2: Off
– LK1 and/or LK2: on (when a network connection is set up from one device to another;
For PROFIBUS configuration - LEDs on the interface module IM 152-1DP of the ET 200iSP:
– SF: Off
– BF: Off
– ACT: Off
– ON: on
– PS1: On, PS2: Off
3.13

Evaluating the diagnostics

Evaluating the diagnostics
If an error occurs, OB82 is started. Evaluate the startup information in OB82.
Tip: Call the SFC13 within the OB82 and evaluate the diagnostics frame from section
"Commissioning and Diagnostics (Page 155)".
ET 200iSP
Operating Instructions, 11/2022, A5E00247483-AK
otherwise off)
Commissioning guideline
3.13 Evaluating the diagnostics
55