Siemens SIMATIC ET 200iSP Operating Instructions Manual page 31

Danger of explosion with wrong transceiver
The IM 152-1PN only works with intrinsically safe SFP transceiver A5E51793919. Plugging in
other transceivers may cause explosions.
Do not plug another transceiver into the IM 152-1PN.
Properties and benefits of ET 200iSP
Table 2-3 Features and benefits
Properties
Modular structure based on 4- or 8-
channel electronic modules
Extensive range of electronic modules Broad area of application
Permanent wiring due to the separa‐
tion of mechanical and electronic
components
Integrated power bus
Screw or spring terminals
Intrinsically safe inputs and outputs
according to Ex ia IIC
Automatic coding of the electronic
modules
Large label
Disabling all digital outputs of a mod‐
ule by an intrinsically safe switching
signal
Changing parameter settings and ex‐
pansion during operation
Time stamping, flutter monitoring,
pulse stretching
Counting and frequency measure‐
ment
Identification and maintenance data
I&M
Analog value representation in S7 for‐
mat
IEEE variables
ET 200iSP
Operating Instructions, 11/2022, A5E00247483-AK
WARNING
• Station design optimized to contain costs
• Reduced configuration and documentation effort
• Space savings due to the ability to string modules together in any order
• Prewiring possible
• Module change during operation of the station ("hot-swapping") is possible if at
least 2 electronic modules are present.
Reduced effort required for wiring
Connection system
Use of most suitable connection method
Intrinsically safe sensors, actuators and HART field devices up to Zone 0/ 20 can be
connected
Quick and reliable module replacement
Adequate space for clear identification
Control of the outputs independent of the process image
No restart of the station necessary
Efficient monitoring of the inputs
Options for use in technological applications
Unique identification/assignment of the modules used (for example, for validation,
quality assurance)
Analog modules with HART support up to 4 IEEE variables in IEEE754 format
Benefits
Structure
Functionality
Product overview
2.1 ET 200iSP Distributed I/O Station
31