Aim Lab PathFinder 350S User Manual page 7

3)
4)
Abbott's liability for all matters arising from the supply, installation, use, repair,
and maintenance of the Instrument, whether arising under this Warranty or
otherwise, shall be limited solely to the repair or (at Abbott's sole discretion)
replacement of the Instrument or of components thereof. In no event shall Abbott
be liable for injuries sustained by third parties, incidental or consequential
damages, or lost profits. Replaced parts shall become the property of Abbott
Laboratories.
THE FOREGOING IS THE SOLE WARRANTY MADE BY ABBOTT LABORATORIES
REGARDING THE INSTRUMENT, AND ABBOTT SPECIFICALLY DISCLAIMS ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE.
The PathFinder 350S is manufactured in Australia for Abbott Diagnostics Division,
Abbott Laboratories, 200 Abbott Park Road, Abbott Park, IL, 60064, USA. Please
direct all inquiries concerning information in this manual to the foregoing address.
Note: direct all inquiries regarding equipment problems to Abbott Customer Service
(USA customers only).
03P27-42 Rev A
Are caused by customer or third party abuse, misuse, or negligence, or by
failure to comply with any requirement or instruction contained in the
applicable Abbott Operator's Manual.
Result from maintenance, repair, or modification performed without Abbott's
authorization.
© Copyright 2010 Aim Lab Pty Ltd
PathFinder 350S User Manual
Page 7