Aim Lab PathFinder 350S User Manual page 52

PathFinder 350S User Manual
6.7.2.1
To edit data in the table, double click on the field of interest. Data is entered in
two ways. A text box, shown on the left in Figure 6-14, is edited by typing data into
the box. A dropdown box, shown on the right, presents a list of possible choices.
After editing one field pressing Enter or Tab will move the cursor to the next field
in the row.
6.7.2.2
To add a new line to the table, click on the blank line at the bottom of the table. A
new entry will be created which can be edited like any other data in the table.
6.7.2.3
To delete a line, select it by clicking on the line once. The line will be highlighted.
Press the Garbage Bin icon at the top of the table and the line will be deleted.
6.7.2.4
To cancel your changes click on the Red Cross icon.
A pop-up box will inform you how many lines have changed and ask you to confirm
you want to cancel all changes. Click OK to return to the original table.
6.7.2.5
No changes made to the configuration table are saved until they are committed. To
commit your changes press the Green Tick icon.
A pop-up box will inform you how many lines have changed and ask you to confirm
you want to commit the new data. Click OK to save the changes.
Page 52
Editing a Line
Figure 6-14 Editing a Configuration Table
Adding a New Line
Figure 6-15 Adding a Configuration Item
Deleting a Line
Cancelling Changes
Committing Changes
© Copyright 2010 Aim Lab Pty Ltd 03P27-42 Rev A