Sorting/Filtering - Aim Lab PathFinder 350S User Manual

View Filter
Log Data
6.8.2

Sorting/Filtering

Data in the view can be sorted by a particular column by clicking on the heading.
Clicking again on the same heading will toggle the order of the sorting.
Immediately above the headings is a filter bar. This allows you to limit what log
data is shown in the view.
The data can be filtered by heading and/or by date. A filter is built by using the
drop down lists in the filter bar:



For example, the following filter in Figure 6-28 will show all data for tube MA0150.
03P27-42 Rev A
Figure 6-27 Example Tube Log Shown in the Views Page
The first field selects which heading to filter by. The options available are
any headings in the view.
The second field selects the restrictions applied by the filter. The options
available are Equal To (=), Less Than (<), Greater Than (>), Not Equal To (≠).
The third field is a text box used to enter filter data.
© Copyright 2010 Aim Lab Pty Ltd
Page Index
Figure 6-28 Views Data Filter
PathFinder 350S User Manual
Print View
Sort by Headings
Page 61