Views Page; Using A Log View - Aim Lab PathFinder 350S User Manual

PathFinder 350S User Manual
6.8

Views Page

Accessed by Operator and Administrator
The views page allows the operator to view operation logs. The data provided in
these views is a valuable tool for diagnosing workflow problems, locating tubes, and
monitoring the LIS communications.
To open a particular view, simply click on the icon next to the name.
6.8.1

Using a Log View

A typical view is shown in Figure 6-27. All views are manipulated in the same way
so the following generic instructions are valid for all views.
Approximately 20 lines of data are displayed on each page. The page index will
allow you to change pages to view earlier data.
Page 60
Figure 6-26 Views Page
© Copyright 2010 Aim Lab Pty Ltd 03P27-42 Rev A