Change Profile; Rack Types - Aim Lab PathFinder 350S User Manual

6.7.3

Change Profile

This table consists of only one line. This sets the current profile to run, and
identification information about the PathFinder 350S installation.
6.7.4

Rack Types

The rack types table lists all the racks that are supported by the PathFinder 350S.
03P27-42 Rev A
The PathFinder 350S needs to be reset after changing the profile.
Refer to Section 7.6 for the reset procedure.
Figure 6-16 Example Change Profile Table
Heading
Profile This is a drop down list of available profiles.
Robot Name This is general laboratory information used in the report
headers to identify the PathFinder 350S installation.
Lab Name
Lab Address
Lab Phone
Robot Model
Figure 6-17 Example Rack Types Configuration
© Copyright 2010 Aim Lab Pty Ltd
PathFinder 350S User Manual
NOTE
Description
Page 53