Tube Log; Episode Log - Aim Lab PathFinder 350S User Manual

6.8.5

Tube Log

The tube log view shows a record of all the tubes recently presented to the
PathFinder 350S. The tube log displays tube identification data, processing data,
and tube configuration data. A typical tube log view is shown in Figure 6-30.
6.8.6

Episode Log

The episode log view shows a list of recent specimen episodes. An episode is a
unique number assigned to a specimen when that specimen is seen on the Sorter.
The episode number is sent to the LIS to track individual actions performed on that
specimen.
03P27-42 Rev A
Heading
Time of Entry Time the record was created.
Barcode Barcode ID of the tube.
Tube Event ID Identifier of the tube event. This can be used to cross
reference patient and LIS information.
Tube Details Sample information, if known, in the format: <Primary /
Secondary> / <Tube Type> / <Sample Type>
Req. Location The location ID requested by the LIS.
Rack Barcode Barcode of the rack the tube was last in.
If the tube is in progress (i.e. not in a rack) it shows the rack
the tube was picked from. Otherwise it shows the barcode of
the rack where the tube was placed.
Real Location Real location ID of the tube.
Status The processing status of the tube. In progress means the tube
is yet to be placed. Complete means the tube has been placed
in a rack.
Error Error code. If the command was not successfully performed,
an error is listed
© Copyright 2010 Aim Lab Pty Ltd
Figure 6-30 Example Tube Log View
Description
PathFinder 350S User Manual
Page 63