Removing The Sub Hopper - Canon iR4570 Series Service Manual

Chapter 7
F-7-126
2) Remove the screw [1], and detach the toner
feedscrew motor assembly [2].
F-7-127
3) Remove the screw [1], and detach the toner
feedscrew motor [3] from the base.
F-7-128
7.12.4.13 Removing the Sub
Hopper
iR2270 / iR2870 / iR3570 / iR4570
1) Remove the 2 screws [2] from the back of the sub
hopper [1].
7-48
2) Check the phase of the gear [1] shown in the figure.
3) Remove the 3 screws [1].
0007-8396
F-7-129
F-7-130