Maintenance
Engine oil filter
Change oil and replace filter as indicated in the
scheduled maintenance table. Use new oil of the
recommended type for topping up and changing
purposes.
Make sure the pre-filter and drainage plug O-rings
are in good conditions. Lubricate them and refit the
mesh filter and the oil drainage plug, screwing
them up to the prescribed torque. Refit the new
cartridge filter being careful to lubricate the O-ring
before fitting it. Change the engine oil.
Recommended products
Engine oil 5W -40 Synthetic-based lubricant for
four-stroke engines.
SAE 5W-40; JASO MA, MA2; API SL; ACEA A3
Characteristic
Engine oil
1,340 cm³ (of which 120 cm³ in the filtering car-
tridge)
Oil pressure warning light
The vehicle is equipped with a telltale light on the
dashboard that lights up when the key is turned to
the «ON» position. This warning light will turn off
when the engine comes on.
If the light turns on during braking, at idling
speed or while turning a corner, it is necessary
to check the oil level and the lubrication sys-
tem.
MAIN - 58
Vespa 946 E4-E5 EMEA-USA-ASIA (2021-)