Vespa 946 E4-E5 EMEA-USA-ASIA (2021-)
Locking torques (N*m)
Hub oil drain screw 15 to 17
Insert through the level check hole the prescribed amount of oil.
Recommended products
Transmission oil 80W-90 Lubricant for gearboxes and transmissions.
SAE 80W-90 API GL-4
Characteristic
Hub oil quantity
300 cm³
Air filter
- Remove the left side fairing.
- Undo the screws indicated.
Unscrew the screw indicated in the figure and re-
move the filter cover complete with air duct.
- Remove the filter element and clean it with water
and shampoo, then dry it off with a clean cloth and
small compressed air jets and immerse it in rec-
ommended oil. Squeeze it between your hands
without twisting it, let it stand until it stops dripping,
and then reinstall it.
CAUTION
IF THE VEHICLE IS USED ON DUSTY ROADS, IT IS NEC-
ESSARY TO SERVICE THE AIR FILTER AND THE CVT
Maintenance
MAIN - 55