VESPA 946 E4 EMEA 2021 Manual page 281

Vespa 946 E4-E5 EMEA-USA-ASIA (2021-)
Chassis
CAUTION
MAKE SURE THAT THE CONNECTING CABLE TO THE
NEGATIVE POLE OF THE BATTERY FOLLOWS THE PAS-
SAGE SHOWN IN THE FIGURE IN ORDER TO AVOID POS-
SIBLE FAILURES.
CAUTION
DO NOT REVERSE THE POLARITY: RISK OF SHORT CIR-
CUIT AND DAMAGE TO THE ELECTRICAL SYSTEM.
WARNING
USED BATTERIES ARE HARMFUL FOR THE ENVIRON-
MENT. COLLECTION AND DISPOSAL SHOULD BE CAR-
RIED OUT IN COMPLIANCE WITH REGULATIONS IN
FORCE.
- Place the support band by tightening the previ-
ously removed fixing screws.
- Refit the central cover and lock it by tightening
the relative fixing screws.
N.B.
THE CENTRAL COVER HAS A RUBBER PROTECTION
AGAINST WEATHERING AND OTHER IMPURITIES ON
THE ROAD.
DURING COVER ASSEMBLY, INSERT THE PROTECTION
IN THE COMPARTMENT BETWEEN BODY AND FOOT-
REST, IN FRONT OF THE SWINGING ARM; THEN PRESS
IT AGAINST THE FRONT PART OF THE VEHICLE, IN OR-
DER TO SUPPORT THE BODY, AS SHOWN IN THE FIG-
URE.
CHAS - 281