VESPA 946 E4 EMEA 2021 Manual page 147

Vespa 946 E4-E5 EMEA-USA-ASIA (2021-)
- Remove the breather pipe.
- Remove the cover.
Removing the hub bearings
Removing the clutch shaft bearing
- Remove the Seeger ring.
- Remove the oil seal from the opposite side.
- Remove the bearing working from the external
side and using the specific tools.
Specific tooling
020376Y Adaptor handle
020363Y 20-mm guide
020357Y 32 x 35-mm Adaptor
Removing the intermediate gear bearing
- Remove the bearing using the specific tools
Specific tooling
001467Y009 Bell for OD 42-mm bearings
001467Y013 Calliper to extract ø 15-mm bear-
ings
Engine
ENG - 147