VESPA 946 E4 EMEA 2021 Manual page 148

Engine
Wheel axle bearing removal
- Remove the bearing using the specific tools
Specific tooling
001467Y009 Bell for OD 42-mm bearings
001467Y013 Calliper to extract ø 15-mm bear-
ings
Removing the wheel axle bearings
- Support the hub cover properly to avoid damag-
ing the sealing surface with the crankcase.
- Remove the Seeger ring from the outside.
- Operating on the inside, remove the oil seal.
- Remove the wheel axle bearing using the specific
tool.
Specific tooling
020376Y Adaptor handle
020364Y 25-mm guide
020359S 42 x 47 mm Adaptor
Removing the intermediate gear bearing
- Remove the bearing using the specific tools
Specific tooling
001467Y013 Calliper to extract ø 15-mm bear-
ings
001467Y009 Bell for OD 42-mm bearings
ENG - 148
Vespa 946 E4-E5 EMEA-USA-ASIA (2021-)