Vespa 946 E4-E5 EMEA-USA-ASIA (2021-)
e - Press the "MF" black button to activate the bat-
tery recharge Maintenance Free as shown in fig-
ure.
f - Check the ignition of the green LED indicated
with a red arrow in figure.
g - The activation cycle of the new battery lasts for
30 minutes after the ignition of the recharge LED
has taken place
h - Disconnect the clamps from the battery and
check the voltage, if voltages are detected of less
than 12.8 V, proceed with a new recharge of the
battery starting from point c of the recharge pro-
cedure of the new battery, otherwise go to point i
i - The battery is now properly activated, disconnect the battery charger from the power supply and
unplug the terminals from the battery.
7) Battery closing.
Insert the airtight cover strips into the filling holes.
Electrical system
ELE SYS - 103