Vespa 946 E4-E5 EMEA-USA-ASIA (2021-)
- Remove the rear brake calliper.
- Place the dial gauge on the disc outer edge.
- Make the wheel hub turn and check the disc de-
viation.
Specific tooling
020335Y Magnetic mounting for dial gauge
Characteristic
STANDARD THICKNESS
4 +0.2 -0.2 MM
MINIMUM THICKNESS
3.5 MM
Max. deviation allowed:
0.1 mm
Front brake pads
Removal
- Remove the brake calliper.
- Undo the indicated screws and remove the brake
pads.
Refitting
- Follow the process in reverse order to refit.
Rear brake pads
Braking system
BRAK SYS - 245