VESPA 946 E4 EMEA 2021 Manual page 161

Vespa 946 E4-E5 EMEA-USA-ASIA (2021-)
Removing the timing system drive
- Before carrying out operations on the timing sys-
tem we recommend positioning the engine at TDC
in compression. To do this use the specific tools.
- Use the holes on the engine crankcase to secure
the tool.
- Position the specific tool in the window between
the flywheel pick-up references as illustrated in the
figure.
Specific tooling
020941Y Crankshaft timing adjustment tool
- First loosen the tensioner and unscrew the fixing
screws.
- Remove the tensioner complete with gasket.
Engine
ENG - 161