VESPA 946 E4 EMEA 2021 Manual page 218

Suspensions
Overhaul
- The bracket for the shock absorber -calliper at-
tachment has two roller bearings separated one
from the other as shown in the photograph
- Remove the two roller bearings from the bracket
with the specific tool operating on the shock ab-
sorber attachment side as shown in the photo-
graph
Specific tooling
020376Y Adaptor handle
020441S 26 x 28 mm adaptor
020365Y 22 mm guide
- Remove the oil seal on the wheel hub side.
- Suitably hold the brake calliper - shock absorber
attachment bracket
- Fit a new oil seal and move it until it stops using
the specific tool
Specific tooling
020376Y Adaptor handle
020360S 52 x 55 mm adaptor
SUSP - 218
Vespa 946 E4-E5 EMEA-USA-ASIA (2021-)