Removing The Valves - VESPA 946 E4 EMEA 2021 Manual

Vespa 946 E4-E5 EMEA-USA-ASIA (2021-)

Removing the valves

- Use the specific tool to remove the cotters, cap
and spring.
CAUTION
PROPERLY REPLACE THE PADS AND ROCKERS SO AS
TO PRESERVE THE COUPLINGS.
CAUTION
DURING ASSEMBLY, POSITION THE VALVE SPRINGS
WITH THE GREEN COLOURED COIL FACING UPWARD.
Specific tooling
020382Y Valve fitting/ removal tool
Engine
ENG - 167