VESPA 946 E4 EMEA 2021 Manual page 225

Vespa 946 E4-E5 EMEA-USA-ASIA (2021-)
- Remove the silentblock from the bracket using an
appropriate extractor.
Specific tooling
020271Y Tool for removing-fitting silent bloc
- Insert the silentblock with the chamfering facing
the bracket.
- Place the silentblock in the bracket using the
specific tool.
Specific tooling
020271Y Tool for removing-fitting silent bloc
For both bearings of the swinging arm on the engine side proceed as follows:
- Use handle and guide to drive the bearing into its seat.
Specific tooling
020439Y 17-mm guide
020456Y Ø 24 mm adaptor
020376Y Adaptor handle
Suspensions
SUSP - 225