VESPA 946 E4 EMEA 2021 Manual page 246

Braking system
Removal
- Remove the rear wheel.
- Remove the brake calliper.
- Remove the locking spring of the pin.
- Remove the pin.
- Remove the spring.
- Remove the pads.
- Check that there are no faults or warping. If there
are, replace them.
- Check that the thickness of the friction material
is more than 1.5 mm. Otherwise, proceed with re-
placement.
BRAK SYS - 246
Vespa 946 E4-E5 EMEA-USA-ASIA (2021-)