Suspensions
- Remove the lower ring and the upper ball bearing
- Slide off the steering pipe from the headstock.
Overhaul
If you have to replace the bearings, due to an excessive clearance, proceed as follows:
- Remove the lower steering bearing using the extractor.
Specific tooling
020004Y Punch for removing steering bearings from headstock
- Insert the new lower steering bearing.
Refitting
- For the removal operations, proceed in reverse order.
Locking torques (N*m)
Lower steering bearing 12 - 14 Upper steering bearing 35 - 40
Front shock absorber
Removal
- Support the vehicle adequately
- Remove the wheel hub
- Loosen the shock absorber lower clamps and re-
move the brake calliper shock absorber mounting.
SUSP - 216
Vespa 946 E4-E5 EMEA-USA-ASIA (2021-)