VESPA 946 E4 EMEA 2021 Manual page 224

Suspensions
- Remove the bearings from both sides of the
swinging arm using an extractor and bell.
Specific tooling
001467Y010 Driver for OD 25 mm bearings
001467Y013 Calliper to extract ø 15-mm bear-
ings
- Remove the plastic thickness of the swinging arm
on the engine side.
- Remove the axis of the swinging arm on the en-
gine side.
- Remove the bearings from both sides of the
swinging arm using an extractor and bell.
Specific tooling
001467Y010 Driver for OD 25 mm bearings
001467Y008 Clamp to extract 17 mm ø bear-
ings
SUSP - 224
Vespa 946 E4-E5 EMEA-USA-ASIA (2021-)