VESPA 946 E4 EMEA 2021 Manual page 57

Vespa 946 E4-E5 EMEA-USA-ASIA (2021-)
oil of the recommended type for topping up and
changing purposes.
N.B.
THE ENGINE MUST BE HOT WHEN THE OIL IS CHANGED.
Recommended products
Engine oil 5W -40 Synthetic-based lubricant for
four-stroke engines.
SAE 5W-40; JASO MA, MA2; API SL; ACEA A3
Characteristic
Engine oil quantity
1,340 cm³ (of which 120 cm³ in the filtering car-
tridge)
Check
This operation must be carried out with the engine
cold and following the procedure below:
- Place the vehicle on its centre stand and on flat
ground.
- Remove the right side fairing.
- Undo cap/dipstick, dry it off with a clean cloth and
reinsert it, screwing down completely.
- Remove the cap/dipstick again and check that
the level is between the MIN and MAX reference
marks; top-up, if required.
If the check is carried out after the vehicle has
been used, and therefore with a hot engine, the
level will be lower; in order to carry out a correct
check, wait at least 10 minutes after the engine
has been stopped so as to get the correct level.
Oil top-up
The oil should be topped up after having checked the level and in any case by adding oil without ever
exceeding the MAX. level.
Maintenance
MAIN - 57