Suspensions
- Refit the parts in reverse order of the removal
operation.
CAUTION
BEFORE CARRYING OUT REFITTING OPERATIONS IN
THE AREAS MARKED WITH AN ASTERISK, LUBRICATE
THEM WITH THE RECOMMENDED PRODUCT
Specific tooling
020036Y Punch
020037Y Punch
Recommended products
Calcium based grease Calcium grease
Smooth-textured appearance; Ivory coloured
Specification TL 9150 066, symbol NATO G 460
Rear
Removing the rear wheel
- Remove the silencer.
- Remove the cover of the wheel pin nut.
CAUTION
FREE THE CABLES OF THE LAMBDA PROBE BEFORE
REMOVING THE SILENCER, PUTTING THIS CABLE HAR-
NESS UNDER AN EXCESSIVE VOLTAGE MAY DAMAGE
IT.
- Unscrew the indicated screws and remove the
rear wheel.
SUSP - 220
Vespa 946 E4-E5 EMEA-USA-ASIA (2021-)