Refitting The Front Wheel - VESPA 946 E4 EMEA 2021 Manual

Suspensions

Refitting the front wheel

- Proceed with the operations in the reverse order,
paying attention to the tightening torques and
check the distance between front speed sensor
and tone wheel. In the event that it is not correct,
insert a washer of 0.6 ± 0.05 mm between ABS
sensor and support until reaching the correct val-
ue.
Characteristic
Tone wheel distance - Sensor X
0.9 ÷ 1.2 mm
Locking torques (N*m)
Front wheel axle nut
fixing screws
20 - 25
Handlebar
Removal
Preventively remove:
- the leg shield back plate
- The footrest
- The mirrors
- The connectors of the instrument panel, head-
lights and electrical devices
- Release the cable harness of the instrument pan-
el, headlights and electrical devices.
- Undo the screws indicated.
- Remove the front handlebar cover complete with
the light assembly and the instrument panel.
- Remove the cables of the accelerator.
SUSP - 214
Vespa 946 E4-E5 EMEA-USA-ASIA (2021-)
Front wheel to hub
74 - 88