VESPA 946 E4 EMEA 2021 Manual page 157

Vespa 946 E4-E5 EMEA-USA-ASIA (2021-)
Inspecting the flywheel components
- Check the integrity of the internal plastic parts of the flywheel and the Pick-up control plate.
- Check the integrity of the internal plastic parts of the flywheel and the Pick-up control plate.
Refitting the flywheel magneto
- Perform the procedure in reverse order of disassembly, taking care to tighten to specified torque.
Locking torques (N*m)
Flywheel fixing nut 100 - 110
Refitting the starter motor
- Fit a new O-ring on the starter motor and lubricate
it.
- Fit the starter motor on the crankcase and lock
the two screws to the prescribed torque.
Locking torques (N*m)
Starter screws
10.8 - 12.8
Engine
ENG - 157