Vespa GTS 250 I.E.
Removing the rear wheel
- Remove the bracket supporting the rear shock
absorber and the muffler;
- Remove the rear wheel by unscrewing the 5
screws indicated in the photograph
Refitting the rear wheel
To refit, carry out the removal operations but in reverse order, observing the prescribed torques.
Locking torques (N*m)
Wheel fixing screws: 20 ÷ 25 Nm
Swing-arm
Removal
- Place the scooter on its centre stand;
- Remove the engine housing
- Remove the swinging arm/engine fitting shown in
the photo
- Move the engine back
- remove the spring anchoring the swinging arm to
the frame as shown in the photo
Suspensions
SUSP - 13