Removing The Rear Wheel - VESPA LX Series User Manual

Suspensions
N.B.
TO REMOVE THE LOWER SEAT OF THE LOWER STEERING BEARING JUST USE A SCREW-
DRIVER AS A LEVER BETWEEN THE SEATING AND THE SLEEVE.
Specific tooling
020004Y Punch for removing fifth wheels from headstock
- Remove the fifth wheel fitting and the dust guard
on the steering tube as shown in figure, using the
specific tool. Proceed giving a few taps with the
mallet.
Specific tooling
020004Y Punch for removing fifth wheels from
headstock
- Refit the fifth wheel fitting and the dust guard on
the steering tube until they stop, using the specific
tool.
Specific tooling
006029Y Punch for fitting fifth wheel seat on
steering tube
Rear

Removing the rear wheel

- Remove the muffler.
- Remove the cotter pin and remove the cap.
SUSP - 198
Vespa LX 125 - 150 i.e.