Removing The Rear Wheel; Refitting The Rear Wheel - VESPA GTS Super 125 i.e. Service Station Manual

Vespa GTS Super 125 i.e.

Removing the rear wheel

- Remove the bracket supporting the rear shock
absorber and the muffler;
- Remove the rear wheel by unscrewing the 5
screws indicated in the photograph

Refitting the rear wheel

To refit, carry out the removal operations but in reverse order, observing the prescribed torques.
Locking torques (N*m)
Wheel fixing screws: 20 - 25
Swing-arm
Removal
- Place the vehicle on its centre stand;
- Remove the engine housing
- Remove the swinging arm/engine fitting shown in
the picture
- Move the engine back
- Remove the spring anchoring the swinging arm
to the chassis as shown in the picture
Suspensions
SUSP - 201