Suspensions
- Suitably hold the brake calliper - shock absorber
attachment bracket
- Assemble a new roller bearing on the wheel hub
side and move it until it stops using the specific tool
Specific tooling
020037Y Punch
Rear
Removing the rear wheel
- Remove the bracket supporting the rear shock
absorber and the muffler;
- Remove the rear wheel by unscrewing the 5
screws indicated in the photograph
Refitting the rear wheel
To refit, carry out the removal operations but in reverse order, observing the prescribed torques.
Locking torques (N*m)
Wheel fixing screws: 20 ÷ 25 Nm
Swing-arm
SUSP - 14
Vespa GTV 125