HEIDENHAIN TNC 620 User Manual page 95

Fundamentals | Creating and entering NC programs
Example
0 BEGIN PGM NEW MM
1 BLK FORM 0.1 Z X+0 Y+0 Z-40
2 BLK FORM 0.2 X+100 Y+100 Z+0
3 END PGM NEW MM
The control automatically generates the block numbers as well as
the BEGIN and END blocks.
If you do not wish to define a workpiece blank, then
cancel the dialog at Working plane in graphic: XY using
the DEL key!
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022
Program begin, name, unit of measure
Spindle axis, MIN point coordinates
MAX point coordinates
Program end, name, unit of measure
3
95