HEIDENHAIN TNC 620 User Manual page 574

15
Group Group number
name ID...
574
System data Index IDX...
number NO....
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
18 -
19 -
20 Index of physi-
cal axis
21 Index of physi-
cal axis
22 Index of physi-
cal axis
23 Index of physi-
cal axis
24 Index of physi-
cal axis
25 Index of physi-
cal axis
26 Index of physi-
cal axis
27 Index of physi-
cal axis
28 Index of physi-
cal axis
29 Index of physi-
cal axis
30 Index of physi-
cal axis
Tables and overviews | System data
Description
Tolerance at high speeds (MP_pathToler-
anceHi) in mm
Max. derivative of jerk (MP_maxPathYank) in
m/s
4
Tolerance factor for curve machining
(MP_curveTolFactor)
Factor for max. permissible jerk at curvature
changes (MP_curveJerkFactor)
Maximum jerk with probing movements
(MP_pathMeasJerk)
Angle tolerance for machining feed rate
(MP_angleTolerance)
Angle tolerance for rapid traverse (MP_angle-
ToleranceHi)
Max. corner angle for polygons (MP_max-
PolyAngle)
Radial acceleration with machining feed rate
(MP_maxTransAcc)
Radial acceleration with rapid traverse
(MP_maxTransAccHi)
Max. feed rate (MP_maxFeed) in mm/min
Max. acceleration (MP_maxAcceleration) in
m/s
2
Maximum transition jerk of the axis in rapid
traverse (MP_axTransJerkHi) in m/s
Maximum transition jerk of the axis during
machining free rate (MP_axTransJerk) in m/
s
3
Acceleration feedforward control (MP_com-
pAcc)
Axis-specific jerk at low speeds (MP_axPath-
Jerk) in m/s
3
Axis-specific jerk at high speeds (MP_axPath-
JerkHi) in m/s
3
More precise tolerance examination in corners
(MP_reduceCornerFeed)
0 = deactivated, 1 = activated
DCM: Maximum tolerance for linear axes in
mm (MP_maxLinearTolerance)
DCM: Maximum angle tolerance in [°]
(MP_maxAngleTolerance)
Tolerance monitoring for successive threads
(MP_threadTolerance)
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022
2