Programming aids | Programming graphics
Magnification or reduction of details
You can select the graphics display
Shift the soft-key row
The following functions are available:
Soft key
The RESET BLK FORM soft key allows you to restore the original
section.
You can also use the mouse to change the graphic display. The
following functions are available:
To shift the displayed model, hold down the center mouse button
or the mouse wheel, and move the mouse. If you press the shift
key at the same time, then you will be able to shift the model only
horizontally or vertically.
To zoom in on a certain area, mark a zoom area by holding the
left mouse button down. After you release the left mouse button,
the control zooms in on the defined area.
To rapidly magnify or reduce any area, rotate the mouse wheel
backwards or forwards.
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022
Function
Shift section
Reduce section
Enlarge section
Reset section
6
209