10
FUNCTION PARAXCOMP DISPLAY
Use the PARAXCOMP DISPLAY function to activate the display
function for parallel axis movements. The control includes
movements of the parallel axis in the position display of the
associated main axis (sum display). Therefore, the position display
of the main axis always displays the relative distance from the tool
to the workpiece, regardless of whether you move the main axis or
the parallel axis.
Proceed as follows for the definition:
Show the soft-key row with special functions
Press the PROGRAM FUNCTIONS soft key
Press the FUNCTION PARAX soft key
Press the FUNCTION PARAXCOMP soft key
Select the FUNCTION PARAXCOMP DISPLAY
function
Define the parallel axis whose movements the
control is to take into account in the position
display of the associated principal axis
Example
13 FUNCTION PARAXCOMP DISPLAY W
When FUNCTION PARAXCOMP DISPLAY is active, the control
displays an icon in the status display.
Icon
Mode
FUNCTION PARAXCOMP DISPLAY is active
In the additional status display, the control also
shows (D) for DISPLAY after the designations of
the affected axes.
No icon
Standard kinematics is active
366
The PARAXMODE icon hides the active
PARAXCOMP DISPLAY icon.
Special functions | Working with the parallel axes U, V and W
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022