Open File - HEIDENHAIN TNC 620 User Manual

Special functions | File functions

OPEN FILE

Fundamentals
The OPEN FILE function allows you to open various file types directly
from within the NC program.
If you define OPEN FILE, the control continues the dialog and you
can program a STOP.
Using this function, the control can open all file types that you can
open manually.
Further information: User's Manual for Setup, Testing and Running
NC Programs
The control opens the file in the software tool last used for this file
type. If you have never opened a file of a certain file type and multiple
software tools are available, the control will interrupt program run
and open the Application? window. In the Application? window, you
can select the software tool the control should use to open the file.
The control saves this selection.
Multiple software tools are available for opening the following file
types:
CFG
SVG
BMP
GIF
JPG/JPEG
PNG
In order to avoid program run interruptions or having
to select an alternative software tool, open a file of the
corresponding file type once in the file manager. If the
files of a certain file type can be opened in multiple
software tools, you can use the file manager to select the
software tool to be used for opening files of this file type.
Further information: User's Manual for Setup, Testing
and Running NC Programs
The OPEN FILE function is available in the following operating
modes:
Positioning w/ Manual Data Input
Test Run
Program Run Single Block
Program Run Full Sequence
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022
10
381