Departing On A Circular Path With Tangential Connection: Dep Ct; Departing On A Circular Arc Tangentially Connecting The Contour And A Straight Line: Dep Lct - HEIDENHAIN TNC 620 User Manual

Programming contours | Approaching and departing a contour
Departing on a circular path with tangential connection:
DEP CT
The tool moves on a circular arc from the last contour point P
the end point P . The circular arc connects tangentially to the last
N
contour element.
Program the last contour element with the end point P
radius compensation
Initiate the dialog with the APPR DEP key and DEP CT soft key
Center angle CCA of the arc
Radius R of the circular arc
If the tool should depart the workpiece in the
direction opposite to the radius compensation:
Enter R as a positive value.
If the tool should depart the workpiece in the
direction opposite to the radius compensation:
Enter R as a negative value.
Example
23 L Y+20 RR F100
24 DEP CT CCA 180 R+8 F100
25 L Z+100 FMAX M2
Departing on a circular arc tangentially connecting the
contour and a straight line: DEP LCT
The tool moves on a circular arc from the last contour point P
auxiliary point P . It then moves on a straight line to the end point P
H
The arc is tangentially connected both to the last contour element
and to the line from P to P
H
R suffices to unambiguously define the tool path.
Program the last contour element with the end point P
radius compensation
Initiate the dialog with the APPR/DEP key and DEP LCT soft key
Enter the coordinates of the end point P
Radius R of the circular arc. Enter R as a positive
value
Example
23 L Y+20 RR F100
24 DEP LCT X+10 Y+12 R+8 F100
25 L Z+100 FMAX M2
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022
. Once these lines are known, the radius
N
to
E
and
E
Last contour element P with radius compensation RR
E
Center angle CCA 180°, radius of the circular path R 8
Retract in Z, return jump, end program
to an
S
.
N
and
E
N
Last contour element P with radius compensation RR
E
Coordinates P , radius of the circular path R 8
N
Retract in Z, return jump, end program
5
153