HEIDENHAIN TNC 620 User Manual page 278

9
Overview
Soft key Function
FN 6: SINE
e. g., FN 6: Q20 = SIN-Q5
Calculate and assign the sine of an angle in
degrees (°)
FN 7: COSINE
e. g., FN 7: Q21 = COS-Q5
Calculate and assign the cosine of an angle in
degrees (°)
FN 8: ROOT SUM OF SQUARES
e. g., FN 8: Q10 = +5 LEN +4
Calculate and assign length from two values
FN 13: ANGLE
e. g., FN 13: Q20 = +25 ANG-Q1
Calculate and assign an angle with the arc tangent
of the opposite and adjacent sides of the triangle
or with the sine and cosine of the angle (0 < angle
< 360°).
278
Programming Q parameters | Trigonometric functions
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022