Overview - HEIDENHAIN TNC 620 User Manual

Klartext programming

Hide thumbs Also See for TNC 620:

Table of Contents

Multiple-axis machining | The PLANE function: Tilting the working plane (option 8)

Overview

Most PLANE functions (except PLANE AXIAL) can be used to

describe the desired working plane independently of the rotary axes

available on your machine. The following possibilities are available:

Running an animation

To familiarize yourself with the various definition possibilities of each

PLANE function, you can start animated sequences via soft key. To

do so, first enter animation mode and then select the desired PLANE

function. While the animation plays, the control highlights the soft

key of the selected PLANE function with a blue color.

Switch on the animation mode

Select the desired animation (highlighted in blue)

HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022

Required parameters

Three spatial angles: SPA, SPB, and SPC

Two projection angles: PROPR and PROMIN and a rotation

Three Euler angles: precession (EULPR), nutation (EULNU)

and rotation (EULROT),

Normal vector for defining the plane and base vector for

defining the direction of the tilted X axis

Coordinates of any three points in the plane to be tilted

Single, incrementally effective spatial angle

Up to three absolute or incremental axis angles A,B,C

Reset the PLANE function

Tnc 620 e Tnc 620 programming station