Defining The Plane Function; Position Display - HEIDENHAIN TNC 620 User Manual

11

Defining the PLANE function

Show the soft-key row with special functions
Press the TILT MACHINING PLANE soft key
The control displays the available PLANE
functions in the soft-key row.
Select the PLANE function
Selecting functions
Press the soft key linked to the desired function
The control continues the dialog and prompts you for the
required parameters.
Selecting the function while animation is active
Press the soft key linked to the desired function
The control plays the animation.
To apply the currently active function, press the soft key of that
function again or press the ENT key

Position display

As soon as a PLANE function (except PLANE AXIAL) is active, the
control shows the calculated spatial angle in the additional status
display.
During tilting into position (MOVE or TURN mode), the control shows,
in the rotary axis, the distance to go to the calculated final position of
the rotary axis in the distance-to-go display (ACTDST and REFDST).
434
Multiple-axis machining | The PLANE function: Tilting the working plane (option 8)
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022