10.5 File Functions; Application; Defining File Functions - HEIDENHAIN TNC 620 User Manual

10

10.5 File functions

Application

The FILE FUNCTION functions are used to perform file operations
such as copying, moving, and deleting files from within the NC
program.
Programming and operating information:
You must not use FILE functions on NC programs
or files to which you have previously made reference
with functions such as CALL PGM or CYCL DEF 12
PGM CALL.
The FUNCTION FILE function is considered only in the
Program run, single block and Program run, full
sequence operating modes.

Defining file functions

Proceed as follows:
Press the special functions key
Select the program functions
Select file operations
The control displays the available functions.
Soft key Function
FILE COPY
FILE
MOVE
FILE
DELETE
OPEN FILE
If you try to copy a file that does not exist, the control generates an
error message.
FILE DELETE does not generate an error message if you try to delete
a non-existing file.
380
Meaning
Copy file: Enter the name and path
of the file to be copied, as well as
the target path
Move file: Enter the name and path
of the file to be moved, as well as
the target path
Delete file: Enter the path and name
of the file to be deleted
Open the file: Enter the name and
path of the file
Special functions | File functions
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022