Example: Linear Movements And Chamfers With Cartesian Coordinates - HEIDENHAIN TNC 620 User Manual

Programming contours | Path contours — Cartesian coordinates
Example: Linear movements and chamfers with Cartesian
coordinates
0 BEGIN PGM LINEAR MM
1 BLK FORM 0.1 Z X+0 Y+0 Z-20
2 BLK FORM 0.2 X+100 Y+100 Z+0
3 TOOL CALL 1 Z S4000
4 L Z+250 R0 FMAX
5 L X-10 Y-10 R0 FMAX
6 L Z-5 R0 F1000 M3
7 APPR LT X+5 Y+5 LEN10 RL F300
8 L Y+95
9 L X+95
10 CHF 10
11 L Y+5
12 CHF 20
13 L X+5
14 DEP LT LEN10 F1000
15 L Z+250 R0 FMAX M2
16 END PGM LINEAR MM
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022
Define the workpiece blank for machining simulation
Call the tool in the spindle axis and with spindle speed
Retract the tool in the spindle axis at rapid traverse FMAX
Pre-position the tool
Move to working depth at feed rate F = 1000 mm/min
Approach the contour at point 1 on a straight path with
tangential connection
Move to point 2
Program the first straight line for corner 3
Program a chamfer with length 10 mm
Program the second straight line for corner 3 and the first
straight line for corner 4
Program a chamfer with length 20 mm
Program the second straight line for corner 4 and approach
the last contour point
Depart the contour on a straight line with tangential
connection
Retract the tool, end program
5
165