HEIDENHAIN TNC 620 User Manual page 572

15
Group Group number
name ID...
Read values from or write values to the active datum table
500
Read values from or write values to the preset table (basic transformation)
507
Read axis offsets from or write axis offsets to the preset table
508
Data for pallet machining
510
572
System data Index IDX...
number NO....
Row number Column
Row number 1-6
Row number 1-9
1 -
2 -
3 -
4 -
5 Axis
6 Axis
10 -
20 -
21 -
Tables and overviews | System data
Description
Read values
Read values
Read values
Active line
Current pallet number. Read value of the
NAME column of the last PAL-type entry. If the
column is empty or does not contain a numer-
ical value, a value of –1 is returned.
Active row of the pallet table.
Last line of the NC program for the current
pallet.
Tool-oriented editing:
Clearance height is programmed:
0 = No, 1 = Yes
Index: 1 - 9 ( X, Y, Z, A, B, C, U, V, W )
Tool-oriented editing:
Clearance height
The value is invalid if ID510 NR5 returns the
value 0 with the corresponding IDX.
Index: 1 - 9 ( X, Y, Z, A, B, C, U, V, W )
Row number up to which the pallet table is to
be searched during block scan.
Type of pallet editing?
0 = Workpiece-oriented
1 = Tool oriented
Automatic continuation after NC error:
0 = Locked
1 = Active
10 = Abort continuation
11 = Continuation with the rows in the pallet
table that would have been executed next if
not for the NC error
12 = Continuation with the row in the pallet
table in which the NC error arose
13 = Continuation with the next pallet
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022