Batch Process Manager (Option 154); Application; Fundamentals - HEIDENHAIN TNC 620 User Manual

Pallets | Batch Process Manager (option 154)

13.2 Batch Process Manager (option 154)

Application

Refer to your machine manual.
Your machine tool builder configures and enables the
Batch Process Manager function.
Batch Process Manager enables you to plan production orders on a
machine tool.
You save the planned NC programs in a job list. You use Batch
Process Manager to open the job list.
The following information is displayed:
Whether the NC program is free of errors
Run time of the NC programs
Availability of the tools
Times at which manual interventions at the machine are
necessary
The tool usage test function has to be enabled and
switched on to ensure you get all information!
Further information: User's Manual for Setup, Testing
and Running NC Programs

Fundamentals

Batch Process Manager is available in the following operating
modes:
Programming
Program run, single block
Program run, full sequence
In the Programming operating mode, you can create and edit the job
list.
The job list will be processed in the Program run, single block
and Program run, full sequence operating modes. Changes are
possible only to a limited extent.
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022
13
525