HEIDENHAIN TNC 620 User Manual page 526

13
Screen display
If you open Batch Process Manager in the Programming operating
mode, the following screen layout is displayed:
1 Displays all required manual interventions
2 Displays the next manual intervention
3 Displays any current soft keys provided by the machine manufacturer
4 Displays the editable entries in the row highlighted in blue
5 Displays the current soft keys
6 Displays the job list
Columns in the job list
Column Meaning
No column Status of the Pallet, Clamping, or Program
name
Name or path of the Pallet, Clamping, or Program
Program
Information about the pallet counter:
Machining method:
Run time in seconds
Duration
This column is shown only if you have a 19-inch
screen.
End of the run time
End
526
1
6
5
For rows of the PAL type: Current actual value
(COUNT) and defined nominal value (TARGET)
of the pallet counter.
For rows of the PGM type: Value indicating by
how much the actual value will be incremented
after the execution of the NC program.
Workpiece-oriented machining
Tool-oriented machining
Time in Programming operating mode
Actual time in Program run, single block and
Program run, full sequence operating modes
Pallets | Batch Process Manager (option 154)
2
3
4
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022