HEIDENHAIN TNC 620 User Manual page 310

9
Example
Send information to StateMonitor.
With function FN 38, you can enter job data, among others. This
requires a job that has been created in StateMonitor and an
assignment to the machine tool being used.
Job management with the JobTerminal (option 4) is
possible with StateMonitor version 1.2 or higher.
Requirements:
Job number 1234
Working step 1
FN 38: SEND /"JOB:1234_STEP:1_CREATE"
FN 38: SEND /"JOB:1234_STEP:1_CREATE_ITEMNAME:
HOLDER_ITEMID:123_TARGETQ:20"
FN 38: SEND /"JOB:1234_STEP:1_START"
FN 38: SEND /"JOB:1234_STEP:1_PREPARATION"
FN 38: SEND /"JOB:1234_STEP:1_PRODUCTION"
FN 38: SEND /"JOB:1234_STEP:1_STOP"
FN 38: SEND /"JOB:1234_STEP:1_ FINISH"
In addition, the workpiece quantities for the job can be reported.
With the OK, S, and R placeholders, you can specify whether the
quantity of reported workpieces has been machined correctly or not.
The A and I placeholders allow you to define how StateMonitor
interprets the response. If absolute values are transferred, then
StateMonitor overwrites the previously valid values. In the case of
incremental values, StateMonitor increments the quantity.
FN 38: SEND /"JOB:1234_STEP:1_OK_A:23"
FN 38: SEND /"JOB:1234_STEP:1_OK_I:1"
FN 38: SEND /"JOB:1234_STEP:1_S_A:12"
FN 38: SEND /"JOB:1234_STEP:1_S_I:1"
FN 38: SEND /"JOB:1234_STEP:1_R_A:15"
FN 38: SEND /"JOB:1234_STEP:1_R_I:1"
310
Programming Q parameters | Additional functions
Create job
Alternative: Create job with part name, part number, and
required quantity
Start job
Start preparation
Production
Stop job
Finish job
Actual amount (OK) absolute
Actual amount (OK) incremental
Scrap (S) absolute
Scrap (S) incremental
Rework (R) absolute
Rework (R) incremental
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022