HEIDENHAIN TNC 620 User Manual page 560

15
Group Group number
name ID...
Coordinate transformations
210
560
System data Index IDX...
number NO....
and oversize
from TOOL
CALL
2 1 = without
oversize 2 =
with oversize 3
= with oversize
and oversize
from TOOL
CALL
3 1 = without
oversize 2 =
with oversize 3
= with oversize
and oversize
from TOOL
CALL
6 Tool no.
1 -
2 -
3 -
4 Axis
5 Rotary axis
6 -
7 -
8 QL parameter
no.
10 -
Tables and overviews | System data
Description
Active length
Rounding radius R2
Tool length
Index 0= active tool
Basic rotation (manual)
Programmed rotation
Active mirror axis. Bits 0 to 2 and 6 to 8:
Axes X, Y, Z and U, V, W
Active scaling factor
Index: 1 - 9 (X, Y, Z, A, B, C, U, V, W)
3D-ROT
Index: 1 - 3 (A, B, C)
Tilt working plane in Program Run operating
modes
0 = Not active
–1 = Active
Tilt working plane in Manual operating modes
0 = Not active
–1 = Active
Angle of misalignment between spindle and
tilted coordinate system.
Projects the angle specified in the QL parame-
ter from the input coordinate system to the
tool coordinate system. If IDX is omitted, the
angle 0 is used for projection.
Type of definition of the active tilt:
0 = no tilt—is returned if, both in Manual
Operation and in the automatic modes, no tilt
is active.
1 = axial
2 = spatial angle
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022